Autel IM608 Pro2 Program 2019 Chevy Malibu All Keys Lost

Today we're going to program 2019 Chevrolet Malibu all keys lost with Autel IM608 Pro2 by OBD. Let's push to start and prepare an universal key at first. The Autel IM508S can also follow the operation steps.

Step1. Remote Generation

Put the Autel Universal Key into XP400Pro key slot.

Universal key >> Accept >> Universal key generation >> North America >> Chevrolet >> Type by model >> Malibu >> 2019 >> Chevrolet Malibu 2017-2021 >> Generate universal key

Universal key generation is completed.

Step2. Read PIN Code

IMMO >> Accept >> VIN >> Chevrolet >> OK >> Yes >> Control unit >> Read immobilizer password(BCMAUTO) >> Password reading

Notes:

1. It is recommended to use a USB cable to connect the VCI for this function process, otherwise the function may fail.

2. For some models, network connection is required for execution of this function. Ensure that the network connection is OK.

PIN code read successfully, please record current PIN code.

PIN code: 2859

Keyless system(CAN) >> Number of smart keys

Number of matched keys: 2

Step3. Add Key

Press "Add smart key".

Please press the Start/Stop button once.

Place the smart key to be learned into the key slot and take other keys out of the vehicle.

The key slot is usually:

1. In the armrest box.

2. Under the bottle rack.

3. Besides the ash tray.

4. In the glove box.

Please input 4-digit pin code: 2859

Please switch the ignition off.

Checking PIN code, the process can take up to 5 mins...

Configuring the system, please wait 12 mins...

Please press the Start/Stop button once.

Configuring the system, please wait 10s...

The current key is complete the matching.

Press "No" to finish.

Please switch the ignition off.

Press the Start/Stop button for 12s.

Release the Start/Stop button.

Please long press the START/STOP button to turn the ignition on until the instrument light illuminates.(If the instrument light is not illuminating, please release the START/STOP button and repeat it.)

Please switch the ignition off.

Depress and hold the brake pedal, press the Start/Stop button to start the engine and wait for 5s.

Please switch the ignition off.

Note:

1. Stop the engine.

2. Open and close the driver door.

3. Remove the smart key, press the Lock and Unlock buttons at the same time, and then release both.

Is there another key to be synchronized? No

Number of matched keys: 3

Matching complete.

Test the new key, it does work.

Done.