Today we’re gonna replace the ignition of VW Touran 2009, use Autel MaxiIM IM608 diagnostic scanner to program the wireless control module(WCM)/wireless ignition(WIN) and add two new keys.
Note: Most things including Immobilizer of this VW is identical to Chrysler Town&Country, so IM608 tablet may display Chrysler during the process.
Procedure:
Step 1.Read password(PIN) from the old ignition
Turn on MaxiIM IM608 Key Programmer,
Select
IMMO>>Auto detect>>Manual selection>>North America>>TOWN&COUNTRY>>2008-2011>>Fobik Key>>SLOT
Then we are in Main menu.
Make sure the device is connected to network.
Select
Control unit>>Read Immobilizer Password(CAN)
With the password, we can disconnect the old ignition and put on the new one.
Step 2.Write PIN to the new ignition
Insert a new key to turn on the ignition.
In the same menu, we select
IMMO module replacement>>Wireless ignition (WIN) replaced
Input the password automatically.
PIN programmed.
Step 3.Key learning
Back to “Control unit” menu.
Select
Immobilizer(CAN)>>Key Learning>>Key Learning
Here we find the new module was programmed 2 keys before, so we need to erase them first.
Go back and select “Erase Key”.
Confirm the password to erase them.
Then we enter “Key Learning” again.
Take this key out and insert another new key to turn on the ignition.
Select “Yes” to continue.
Learning success.
Select “No” to finish the procedure.
Complete!
That’s the process of VW Touran 2009 ignition replacing&programming and key programming by Autel IM608.
Read also:
Ford Explorer 2011 PCM Programming and Parameter Reset by Autel IM608
Benz W221 Front SAM Module Cloning / Programming by Autel IM608
More functions to be explored.
Contact Information:
Email: sales@AutelShop.de
Wechat: +86-13429866263
Whatsapp: +86-13429866263
Source:http://blog.autelshop.de/autel-im608-ignition-programming-for-vw-touran-2009-chrysler-success/
Post a Comment