Today I'm going to show how to do all keys lost on a Toyota H chip key ignition with Autel MaxiIM KM100. This is a 2017 Toyota Corolla. What I'd recommend first is take note of your security light should be blink in there. When I'm taking my key into the ignition, the theft light is still off.
Plugged VCI into car OBD.
IMMO >> Toyota >> Automatic selection >> Read >> OK >> Control unit >> Immobilizer >> Immobilizer(H 8A/8E) >> Immobilizer reset(all keys lost)
.jpg)
.jpg)
.jpg)
.jpg)
Autel KM100E says:
This function only supported for Middle East and USA now, press OK.
Ensure that the door remains open during the learning process.
Enter the number of keys to be registered: 1
Turn the ignition off.
Turn the ignition on.
Turn the ignition off and remove the key.
Turn the ignition on.
Turn the ignition off and remove the key.
Follow the following step to learn 1 master key within 120s:
Insert the master key, turn the ignition on and wait 5s. Then quickly turn the ignition on and back off 5 times until the SECURITY lamp goes out, which indicates that learning is completed.
Let's check the number of keys: 1 master key.
So the key has been successfully programmed.
.jpg)
.jpg)
.jpg)
Contact Info:
Email: sales@AutelShop.de
Wechat: +86-13429866263
Whatsapp: +86-13429866263
Post a Comment