Problem: Regarding the Autel IM608 Pro2 + IMKPA expanded key programming I faced problem when I want to connect to the car. It takes a long time for connecting to the car.
What's the matter? Please help.
.jpg)
.jpg)
Reason
Some customers met Bluetooth connection issue after upgrading IM608S II VCI firmware to V1.23. Here we provide 2 solutions to fix the problem.
Solution 1. Reboot JVCI+
The temporary solution is to connect the JVCI+ to the 12 volt external power supply. Then connect JVCI+ to the IM608 II tablet via Bluetooth.
When it is not connecting normally, disconnect firstly and then connect to the power supply again(the point is to reboot the JVCI+). Then you can connect the JVCI+ via Bluetooth again.
.jpg)
Solution 2. Update JVCI+ OS Version
1. Download the PC suits from Autel website:
https://download1.auteltech.net/Download/PCSuite/MaxiPCSuit/V1.40/MaxiPCSuite_V1.40.zip
* Please noted that the PC suits is just for the JVCI+ driver, install the PC suits. For the PC can recognize the JVCI+.
2. Download the zipped file of VCIUpdate:
3. Run the following device to upgrade exe file.
Select "MaxiFlash JVCI+" in the following interface, then click on: 确定(confirm) >> 检测设备(detect device) >> 开始升级(start to upgrade VCI OS)
.jpg)
.jpg)
.jpg)
4. After JVCI+ has been upgraded, test with the IM608 II tablet again with Bluetooth. To check if the Bluetooth connection is back to normal.
Technical Support
Email: sales@AutelShop.de
Wechat: +86-13429866263
Whatsapp: +86-13429866263
إرسال تعليق