I used the Autel MaxiIM KM100 for an all-keys-lost job on a 2020 Nissan Altima. The smart key learning function handled the key programming without issues.
Enter Smart Key Learning
- Go to IMMO → AutoVIN. When prompted, turn on the hazard warning lamps and open and close the driver door once. If the conditions are met, turn on the ignition.
- On the Autel KM100, go to Hot Function → Smart Key Learning → Start. Confirm Yes to erase all learned keys. Prepare all keys to be programmed. Up to 4 keys can be learned.
- Turn off the ignition. Turn on the hazard warning lamps. Open and close the driver door once. The BCM code will be read out.
Note: For some 2010–2017 models, key learning may lock up the BCM. If this happens, the BCM must be replaced before relearning the keys.
Learn the Smart Keys
- Place the original smart key against the ignition switch. Press the ignition switch once. Within 5 seconds, place the key to be learned against the switch with its back facing it. The instrument cluster will light up automatically.
- If the security lamp does not go out, immediately use the original key against the ignition switch. Turn off the ignition.
- When Program success appears, select Yes to program the next key. Repeat the same operation. After the last key, select No and turn off the ignition.
Finish Programming
- Press the start/stop button. Within 5 seconds, attach the first learned smart key to the start/stop button. The instrument cluster will light up automatically.
- Turn off the ignition and wait 3 seconds.
Verification
Start the engine and check the remote control. The vehicle should start and the basic functions should work normally.
Contact Info:
Email: sales@AutelShop.de
Wechat: +86-13429866263
Whatsapp: +86-13429866263
www.autelshop.de
إرسال تعليق