How to use Autel XP400 Pro Programming Functions?

MaxiProgrammer XP400 Pro can work with Autel MaxiIM IM508, IM608, IM608 Pro to program data and vehicle keys. Supports to read & write EEPROM, MCU, immobilizer, engine, Mercedes infrared key, etc.

Thereinto, buy IM508 + XP400 Pro together is the most highly cost-effective combination. IM608 + XP400 Pro is equal to IM608 Pro in IMMO functions.

Differences please refer to comparison chart below:

Next, we’ll demonstrate from several operation procedure to learn how to use XP400 Pro programmer, covering

Renew Key
Read & Write ECU
Read & Write MCU
Read & Write EEPROM

NOTE: It is recommended to wear electronical insulated gloves before operation.

How to renew key with XP400 Pro?

Tools: XP400 Pro, APB113 adapter, IM508/ IM608

Steps:

Connect key chip with APB113 adapter & XP400 Pro by wiring;
Connect XP400 Pro with IM508/ IM608;

Menu Path:

Programmer >> Accept >> Chip(EEPROM, MCU, ECU) >> Chip read & write >> Remote >> Select car model to renew

How to read & write ECU with XP400 Pro?

Method 1

Tools: XP400 Pro, APA109 adapter, IM508/ IM608

Steps:

Connect ECU with APA109 adapter & XP400 Proby wiring;
Connect XP400 Pro with IM508/ IM608;

Method 2

Tools: XP400 Pro, DuPont jumper wires, IM508/ IM608

Steps:

Connect ECU with XP400 Pro by DuPont jumper wires;
Connect XP400 Pro with IM508/ IM608;

Menu Path:

Programmer >> Accept >> Chip(EEPROM, MCU, ECU) >> Chip read & write >> Immobilizer >> Select car model to read & write.

How to read & write MCU with XP400 Pro?

Tools: XP400 Pro, APB106 Adapter, IM508/ IM608

Steps:

Weld MCU onto APB106 adapter corresponding position;
Connect APB106 adapter with XP400 Pro by wiring;
Connect XP400 Pro with IM508/ IM608;

Menu Path:

Programmer >> Accept >> Chip(EEPROM, MCU, ECU) >> Chip read & write >> MCU >> Select model to read & write

How to read & write EEPROM with XP400 Pro?

Method 1

Tools: XP400 Pro, APA103 EEPROM Clamp, IM508/ IM608

Steps:

Connect EEPROM & XP400 Proby APA103 clamp;
Connect XP400 Pro with IM508/ IM608;

Method 2

Tools: XP400 Pro, APA002 EEPROM Socket, IM508/ IM608

Steps:

Put EEPROM into APA002 socket corresponding position;
Insert APA002 socket into XP400 Pro;
Connect XP400 Pro with IM508/ IM608;

Method 3

Tools: XP400 Pro, APB129 EEPROM Adaptor Shell, IM508/ IM608

Steps:

Weld EEPROM on APB129 adaptor corresponding position(supports 6-pin & 8-pin chip);
Insert APB129 adaptor into XP400 Pro;
Connect XP400 Pro with IM508/ IM608;