Autel KM100 Program 2017 Kia Sportage ID46 All Keys Lost

This is how to perform Autel KM100 All Keys Lost for 2017 Kia Sportage QL ID46 by OBD. The car is with push start system. Following I'll show how to do it.

 

KM100 KIA Sportage(EU) QL IMMO Car List

Year	System	Add key	All keys lost	Read password	Remote learning
2016	Immobilizer	By OBD	By OBD	×	By OBD
2016	Keyless system	By OBD	By OBD	By OBD	No required
2017-2018	Immobilizer	By OBD	By OBD	×	By OBD
2017-2018	Keyless system	By OBD	By OBD	By OBD	No required
2019-	Immobilizer	By OBD	By OBD	×	By OBD
2019-	Keyless system	By OBD	By OBD	Partially supported by OBD	No required

 

1. Generate Remote

Put a Autel Smart Key into KM100 key slot:

Universal key >> KIA >> Kia Sportage(QL) 2016-2018 >> Generate universal key

2. Read Password

Plug MaxiVCI V200 into OBDII, wait it connected to KM100.

IMMO >> America >> 2017- >> Yes >> Hot function >> Read immobilizer password >> Read Pin code(46 smart card) >> Read pincode by OBD

 

The function is only supported for vehicles with 46-chip smart card. Please confirm whether the type of the key is correct!

Press "OK".

Warning:

You must turn off the Bluetooth function of the device and connect VCI to diagnostic tool within USB cable. Otherwise the function may fail!

 

Reading password, please wait...

The password that is read: 791243

3. Add Key

Add key >> Start

This function supports add key and all keys lost.

Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally.

Press "Yes" to continue.

 

Turn the ignition off.

(Note: the instrument screen is black)

Open and then close the driver door once!

Autel MaxiIM KM100 will enter the security code automatically

OK >> Yes

 

Note! Click "OK" to complete the following steps:

Within 5s after OK is pressed, use the back or top of the smart key to hold down the START button for 5s until the anti-theft lamps flash.

(if the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully programmed.)

 

Programming succeeded.

Press "No" to compete.

 

Number of current keys: 1

Please exit the system to the vehicle selection menu and check if the key is programmed successfully.

 

Test the key, it does work well.

Done.

Contact Info:

Email: sales@AutelShop.de

Wechat: +86-13429866263

Whatsapp: +86-13429866263

www.autelshop.de