Today we're going to program a new key for this 2020 Dodge RAM 2500 truck with Autel MaxiIM IM608 PRO II. We already have an original key and a new key at hand. Besides, for the cars from 2018 and up, you'll also need a special adapter or AutoAuth account to unlock the gateway.
The gateway module of this car is right behind the instrument panel. Without further ado, after connecting the adapter & Autel IM608 II, let's go.
.jpg)
.jpg)
IMMO >> Accept >> DODGE >> North America >> RAM(2500/3500) >> 2021-2023 >> Smart Key >> Yes
If you have a learned key, turn on the ignition.
Control unit >> Read immobilizer password(CAN)
Turn the ignition off, and turn the hazard on.
The read password is: 25465
.jpg)
.jpg)
.jpg)
Hot function >> Smart key learning >> Start
To learn programmed keys, you have to finish "Erase Key" first.
A checked PIN code has been saved, do you want to reread? No
Turn the ignition off and turn on the emergency flashers.
Please make sure the ignition is OFF, all wireless devices(laptops, cell phones, other proximity keys) are not close to the proximity key being. Press "Yes".
Please enter a 5-digit password: 25465
Hold the proximity key near the center console or Start/Stop button, and repeatedly press the unlock button. Complete the procedure within 60 seconds.
Repeatedly press and release the unlock button on the proximity key.
Learning successful.
Check the new key, it can work.
Done.
.jpg)
.jpg)
.jpg)
.jpg)
Contact Info:
Email: sales@AutelShop.de
Wechat: +86-13429866263
Whatsapp: +86-13429866263
إرسال تعليق